3 Areas of a Forklift You Must Be Familiar With

People that drive everyday are very familiar with their cars.  They know exactly how all the controls work, how to read the gauges, how to check for potential problems, and also how the car is supposed run which makes any problems noticeable.  If you use a forklift for your job every day, you should have the same level of familiarity with your forklift that you have with your car.  Much like your car, your forklift requires regular maintenance and must be handled properly.  There are three very important areas of a forklift that you should become familiar with in order to keep your forklift operating and get the most out of it.  Knowing these three areas very well will help you take better care of your forklift and recognize when there is a problem.

3 Areas of a Forklift You Must Be Familiar With in Chicago ILFluid Reservoirs

The fluid reservoirs in a forklift are located in engine block, trans axle, and radiator.  Checking the fluids, including the gas, oil, antifreeze, transmission fluid, battery acid, and hydraulic fluid should be part of your safety check before operating the forklift.  It is very important that all fluids are at the right level when driving the forklift because if any of these fluids are low, it can result in considerable damage.  Low antifreeze can cause the engine to overheat and low transmission or hydraulic fluids can cause damage to these systems.  Maintaining the level of fluids on a regular basis will help you become more familiar with the operation of your forklift.

Movable Parts

Forklifts consist of many moving parts that must all be in working order for the forklift to operate efficiently.  As part of your preliminary safety check, you should look under the hood and make sure the moving parts are lubricated and working properly.  If a part is not lubricated well enough, the friction can lead to damage.  Be sure to lubricate any forklift parts that need it and clean out any rust or oxidation buildup.

Dashboard Gauges

The dashboard in a forklift contains all the gauges, lights, and warnings that let you know how the forklift is operating.  It is important for you to not only pay attention to these gauges, but understand how to read them and what they are telling you.  If a certain warning light goes unnoticed, it can have very damaging or even dangerous consequences.  You should check all gauges and warning lamps right when you turn on the forklift and take care of any issues if there is a malfunction indicator lamp (MIL) on.  Most problems indicated by the warning lights are in a stage where they can be easily repaired, but ignoring these issues will only allow them to get worse.  You must also make sure each gauge and warning light works properly so that you are notified of any problems.  You can learn about each gauge and warning light on your forklift in the instruction manual.

If you are an everyday forklift operator, make sure you understand how to maintain these important areas of the forklift to keep it running efficiently for as long as possible.  Being familiar with these areas will help you learn more about how your forklift operates and recognize when your forklift needs maintenance.  Despite your best efforts to take care of your forklift, there will be times your forklift needs professional maintenance to get it back up and running.  Call the experts of RHI Lifts at (847) 447-0700 for reliable forklift maintenance and other Chicago forklifts services.