|
| |
|
|
| |
Home > Products > Commercial Lifts > Two Post Lifts > 11AS Specs
| Model Number: |
11AS |
| Style: |
Asymmetrical / Symmetrical |
| Lifting Capacity: |
11,000 lbs. |
| Overall Height: |
149 5/8" (3,800mm) |
| Overall Width: |
142 1/2" (3,620mm) |
| Lifting Height: |
77 1/2" (1,969mm) |
| Width Between Posts: |
115 3/4" (2,940mm) |
| Drive-Thru. Clearance: |
94 1/2" (2,400mm) |
| Front Arm Min. Length: |
28 3/8" (720mm) |
| Front Arm Max. Length: |
40 1/8" (1,020mm) |
| Rear Arm Min. Length: |
41" (1,040mm) |
| Rear Arm Max. Length: |
64 1/2" (1,640mm) |
| Min. Pad Height: |
4 1/8" (105mm) |
| Maximum Load Per Arm: |
2,750 lbs. |
| Lifting Time: |
55 Sec. |
| Motor: |
220 v / 60 htz.1 Ph |
| Shipping Weight: |
1,650lbs. |
- 11,000lb capacity
- Asymmetrical and symetrical design combined in one lift
- Clean floor design
- 2-piece column design
- Large columns (9 1/2" x 10 5/8")
- Large Baseplates (17 1/8" x 18 3/4")
- Automatic overhead shut-off bar
- Straight columns with 2 front angle arms
- Direct-drive cylinders
- 2 heavy-duty hydraulic cylinders
- single point safety release
- Automatic safety lock
- Reinforced carriages
- Extra low profile pads and arms for low ground clearance
- Long carriage (40") for smooth lifting
- Large automatic arm restraints
- Extra rigid overhead design
- Convenient stack-pad storage racks on posts
- Large ultra-high molecular weight (UHMV) slider blocks
- Steel aircraft equalizing cables
- 3HP motor power unit
- Pre-assembled equal cables & hydrolic hoses
- 8 height adapters included (2" height x 4pcs & 6" height x 4pcs)
- Crinkle coat power coat finish provides superior resistance against corrosion
|
|
|
|
